JKIDD
Auto Addict
My lower steering column surround was loose & would rattle at times while driving (driving me nuts). Once I removed it I discovered the mount points where the screws attach it to the column has completely disintegrated. Being too cheap to spend the $80+ for a replacement I set out to find a fix. I discovered that the plastic cover from the tip of the O2 sensor I just bought was just the right diameter to insert into the existing hole (I just helped a co-worker change his so I had 2 available). I cut the larger portion off the bottom, test fit to set the correct depth, then JB Weld-ed it in place. A little "Plastic Surgery" if you will... Drilled a new hole for the screw & presto, problem solved. Not sure if this is a wide spread issue or not, but this is a simple solution. Hardest part would be finding 2 O2 sensor caps....