geekdaddy
X1/9 Learner's Permit...
So I'm thinking about the frunk strut mod based on this thread:
http://xwebforums.com/forum/index.php?posts/31361&page=2
To provide a little better clearance for the Targa, I'm considering this bracket:
http://www.ebay.com/itm/390516698748?_trksid=p5197.c0.m619
Mounted to the front of the frunk hinge (instead of the side as others have done) which is also flatter -- the side of the hinge is curved a bit. Would also allow the strut mounting point to shift slightly outboard without hitting the frunk side.
Will order some and try to fit the struts in a few months and will report back...
http://xwebforums.com/forum/index.php?posts/31361&page=2
To provide a little better clearance for the Targa, I'm considering this bracket:
http://www.ebay.com/itm/390516698748?_trksid=p5197.c0.m619
Mounted to the front of the frunk hinge (instead of the side as others have done) which is also flatter -- the side of the hinge is curved a bit. Would also allow the strut mounting point to shift slightly outboard without hitting the frunk side.
Will order some and try to fit the struts in a few months and will report back...