Jeff Stich
True Classic
SOLD - Good used cylinder head from a non-running '85 X1/9 1500 FI engine. Fiat casting #5985590, date stamped 1984. Combustion chambers are in good shape with no cracks or other damage, just the usual carbon build-up. Chamber #4 cleaned up well using just some carb cleaner & a toothbrush, chamber #3 was coming along nicely until my hand started cramping (I gave up), chambers #2 & #1 got a few shots of carb cleaner just so I could better verify their general condition. Head surface also looks good with no damage.
All original cylinder head bolts/washers & cambox bolts/washers are included (plus a single replacement OEM short cambox bolt), as well as 1 pair of manifolds-to-cylinder head gaskets (tan), 1 pair of FI intake port gaskets (blue) & the pair of sensors shown fitted to the head above spark plug hole #2. The heater hose metal elbow tube is rusted-through on the outer end. 3 bolts/studs snapped off when removing the head & will need to be drilled out/removed; 1 short front cambox mounting bolt (above spark plug #1), 1 lower exhaust manifold mounting stud (cylinder #4 exhaust port) & 1 thermostat housing mounting bolt (lower/exhaust side).
SOLD
All original cylinder head bolts/washers & cambox bolts/washers are included (plus a single replacement OEM short cambox bolt), as well as 1 pair of manifolds-to-cylinder head gaskets (tan), 1 pair of FI intake port gaskets (blue) & the pair of sensors shown fitted to the head above spark plug hole #2. The heater hose metal elbow tube is rusted-through on the outer end. 3 bolts/studs snapped off when removing the head & will need to be drilled out/removed; 1 short front cambox mounting bolt (above spark plug #1), 1 lower exhaust manifold mounting stud (cylinder #4 exhaust port) & 1 thermostat housing mounting bolt (lower/exhaust side).
SOLD
Last edited: