box hvac

Among my tasks right now is to replace my cooling hoses. I have the primary hoses coming from MWB, 4 major ones that are kitted and the 90° elbow to go from the thermostat to the bypass pipe. So I understand that the lower hose to the coolant reservoir tank from the thermostat housing is a...

I finally hadta re-pipe my car and took my OWN advice and used Type L (or M) 1" copper pipe. Thanks to Dom and Dan for their help posting the .jpg here. View the attachment.

I've been restoring my 1981 X for a little over a year now and have gone all in. Don't know for sure the condition of all the systems so in favor of hoping they will all be solid after 36 years i'm replacing everything so I know for sure that it wont let me down and leave me stranded somewhere...

So I got a 1986 Bertone X to replace my 1985 that was rear ended in February. The car I bought was in pretty good shape, but needed an AC for me to use here in Texas where it is often over 100 Degrees. I had the car shipped from Washington State to Texas and unfortunately the shippers damaged...

Recall that this project was started last August when the wife requested that I tackle the X1/9s AC and get it going again (http://xwebforums.com/forum/index.php?threads/18173/). But was interrupted by Fall and by a heater/AC blower motor that required rebuilding...

About the time that I was starting to rebuild the AC system last summer, my AC-Heater blower started to become balky. So that halted my AC project, which I will pick up in my other thread when I finish a re-build of the AC Heater box. It is just as well, since I discovered that the upper...

My 79 has started leaking from the under car coolant lines. Currently I have been drilling out the 100 or so spot welds that hold the pan to the body that protects them. However it appears that there must be a clip or cross brace that is holding the bracket to the pipes under the car. Does...